Question

Hello!
RUTX10, how to configure NAT masquerade using "uci show" ? or another command CLI

Answer 1

Hello,

You can try the following commands to configure the rule:

• uci add firewall redirect
• uci set [email protected][-1].name='<Rule_name>'
• uci set [email protected][-1].src='lan'
• uci set [email protected][-1].src_dport='<Port_number>'
• uci set [email protected][-1].target='SNAT'
• uci set [email protected][-1].src_dip='<IP>'
• uci set [email protected][-1].proto='all'
• uci set [email protected][-1].dest='wan'
• uci set [email protected][-1].src_ip='<Source_IP>'
• uci set [email protected][-1].dest_ip='<Destination_IP>'
• uci commit
• /etc/init.d/firewall restart

Replace <> with your data accordingly.

Best regards,