FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
365 views 3 comments
by anonymous
Hello together.

Have a big problem with the routing I think.

I have a switch from D-Link over it run my VLAN
Previously I used a Fritzbox and there my DHCP 192.168.57.1 (Fritzbox IP) used and that over an interface Vlan at the switch (Ip 192.168.57.2) used.

On the individual POrt I then assigned my VLAN with the DHCP in the switch. e.g. 1100 (10.10.0.0) 1200 (10.20.0.0) and so on.

In the Fritzbox I have entered the routes
10.10.0.0 255.255.255.0 Gateway 192.168.57.2
10.20.0.0 255.255.255.0 Gateway 192.168.57.2

This is how it worked with the Fritzbox.

Certain routes in the switch were of course also entered.

IP Address Netmask Gateway Interface Name Cost Protocol
0.0.0.0 0.0.0 192.168.57.1 Fritzlan 1 Default
10.20.0.0 255.255.255.0 0.0.0.0 Service 1 Local
192.168.57.0 255.255.255.0 0.0.0.0 Fritzlan 1 Local

Now to my problem.

I own the LTE Rutx14

My routes
Network Target IPV4-Gateway Metric Table
(wwan0) 0.0.0.0/0 * 4 main
lan 10.10.0.0 192.168.57.2 1 main
lan 10.30.0.0 192.168.57.2 1 main
lan 10.40.0.0 192.168.57.2 1 main
lan 10.50.0.0 192.168.57.2 1 main
lan 10.60.0.0 192.168.57.2 1 main
(wwan0) 10.112.177.73 * 4 main
lan 192.168.57.0/24 * 1 main

I get a network connection but no internet connection and I can't ping the router 192.168.57.1 from my pc with IP 10.20.0.100.
I think I have a configuration problem in the routing but unfortunately I can not find it.

I have drawn a sketch so that you can see what I mean.

On LAN1 on the router Rutx14 is via POE the connection to the switch on port 24.
Lan on the router is static with IP 192.168.57.1
DHCP on the interface is enable and you get from 100 to 150 an IP on the ROUTER A gateway is not set up on the router.

On port 7 on the switch is the desktop pc plugged in and gets an Ip 10.20.0.100
ipv4 GW 10.20.0.1
Subnet 255.255.255.0
DNS 192.168.57.1

Thanks for the help.
by anonymous
I solved the Problem bei myself.

The Problem was the standard Subnetz in RUTX14 was 255.255.255.255 i change it into 255.255.255.0 now it works.

THX

2 Answers

0 votes
by anonymous
Hello,

As I understand, the issue was solved. Glad to hear that it works!

Best regards,
DaumantasG
by anonymous
I have some Problems with the Routing and the Firewall.

I have no exp with LTE Routers. Sry.
0 votes
by anonymous
I have a new Question.

Why is this Route dynamic set lan 192.168.57.0/24 * 1 main and this too (wwan0) 10.112.177.73 * 4 main

10.112.177.73 this is a Public IP from Mobi1S1A1 and not WAN.
by anonymous

Hello,

  

wwan0 (wireless WAN) is the same as mob1s1a1 (SIM1 slot). Everything seems to be correct in your route table, could you clarify the issue you're experiencing?

  

Best regards,
DaumantasG