FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
232 views 1 comments
by anonymous
Hello

I'm trying to perform remote access via an OMRON TM robot using a RUT955 via RMS VPN, I manage to ping the IP destined for the Robot via the LAN port, but I can't see it in the TMFlow software, where the software only mirrors the software that is running inside of the Robot's CPU.

Would you have any tips?
by anonymous
Pls, clarify your issue. I do not understand. You might provide a simple diagram of your setup.

1 Answer

0 votes
by anonymous

Hello,

  

Make sure you have LAN Forwarding enabled and route to the robot added in the RMS VPN Hub. Instructions on how to do so can be found in this video or this article. I'd also make sure that your LAN IP is not in the same network as the robot, as this could cause routing issues in Windows.

Let me know if any more help is needed!

  

Best regards,
DaumantasG