WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

TRB 140 in RMS-VPN and Devices behind it

0 votes
263 views 0 comments
by anonymous
Hey there,

I currently start getting into the TRB-140. I already setup RMS + RMS-VPN and my openVPN connection to be able to reach a device trough the VPN behind the router. Thats all working as expected.

Lets assume the following:
TRB140 (WAN: 10.183.20.13

TRB140 (LAN): 192.168.2.1
Device (direct connect to TRB140 LAN) 192.168.2.10
TRB140 (RMS-VPN): 192.168.255.100

How and what do I need to setup, if I want to get the direct connected Device behind der TRB140 to get an IP from the RMS-VPN like 192.168.255.111? So that every device behind every TRB140 is basically in the same subnet of the RMS-VPN. Is that even possible?

I found something like intra-zone-forwarding but that seams to not be the right one.

Cheers and best regards

Danny

1 Answer

0 votes
by anonymous
Hi,

RMS VPN Hubs are not intended to be used in the way you described. The purpose of the RMS VPN hub is to create a secure tunnel to your Teltonika device. Once the tunnel is established, you should be able to access your LAN devices through the VPN tunnel using your TRB140. Is there a problem with this method? Can you please explain what you are trying to accomplish?

Kind Regards,

Andzej