Question

Trying to setup VPN for Ubiquiti USG to Manage VPN for Workers to connect to server while away, RUT950 set as WAN1 on the USG, if i change RUT950 Mode to Passthrough or Bridge i can get working but then run into other issues with Data Usage Management (Limited Data available) and other used RUT950 Features.

Is there a way to just pass PPTP traffic straight to USG and/or disable RUT950 VPN services ?

VPN to The RUT950's own VPN services just lands them the wrong side of USG.

Answer 1

Hi,

As I understand your "Ubiquiti USG" use internet from RUT950? If so, then try to set DMZ in RUT950 (Network -> Firewall).

Comments

Yes DMZ is on but still not working

---

Also you can try to disable firewall in router via SSH: /etc/init.d/firewall stop

If issue persist, perhaps you have made some config in your "Ubiquiti USG" which need exactly WAN IP (not lan), perhaps some rules in firewall?

---

Ill try the Firewall thing, as i said before Passthrough and Bridge Work fine, and no issues with a Nighthawk M1/2 in same config.

---

Did this get resolved ??WHAT Was the answer 

https://community.teltonika-networks.com/9436/passthrough-bridge?show=9508#c9508 similar problem Perhaps//