Question

What settings in a RUT955 do I need to set under GPS to get the router to work with Traccar?

I have set the server address and port address to 5027, but I am unable to get Traccar to update with the settings from thr router, I have spoken to Traccar support and they have advised that I shoudl speak to Teltonika support for the correct settings to use. Are you able to help?

Comments

To clarify, I meant I have set the server address to the address of my Traccar server and opened port 5027, I can see that the RUT955 is creating log entries in the traccarserver.log but the Traccar server is showing the router offline and does not update the map.

Answer 1

Hi,

In router is needed to set correct IP/hostname of server and correct port.

But according details in https://www.traccar.org/devices/ seems like RUT955 is not supported. In Traccar should be implemented RUT955 protocol: https://wiki.teltonika.lt/view/RUT955_Protocols

Comments

Yes, I already sent the GPS protocol information to Traccar and their reply was "This looks more like standard Teltonika protocol" and they suggested I speak with Teltonika.

---

Could you add screen shot with your used settings in router?

---

See below, I have tried selecting each and every one of the settings under NMEA sentance - but not actually sure what ones I should be selecting.

Image 1
Image 2
Image 3

---

Hi,

Restore router to default settings.

After this configure only WAN settings and AVL settings: enable GPS and enter your server data (IP/port).

When router will get GPS fix, then it should start to send data to your server.