Question

After installing my RUT950 no traffic would pass from the WAN to the LAN. I figured out I had to set Port Forwarding rules but I'm wondering if there is an easy way to simply tell the RUT950 to pass ALL traffic to a given LAN port, or all LAN ports?  I have a separate firewall and I want it to have the rules.

thx

Answer 1

Hello,

If you need all inbound traffic to be passed to an ip in lan - then simply use a DMZ field in the network -> firewall menu. Insert your internal firewall's ip there and all wan traffic shall be passed to it. No need to set up manu forwarding rules.

Am i corect in assuming this is what you need?