Question

Hello everyone

I have been trying to connect via  OpenVPN the devices that are connected to the RUT....

Setup:

• Rut 955 mit Public IP
• IP Adresse Rut: 192.168.10.49. DHCP: 192.168.10.50 - 192.168.10.70
• IP Adresses of the  PLC's: 192.168.10.120 - 192.168.10.150 (No DHCP)
• OpenVPN Server is Activ. Local Endpoint: 172.16.0.1 Remote Endpoint: 172.16.0.2. Static Key -> Like in the Teletonika GUIDE
• OpenVPN Client on a Windows 10 PC
• I can connect the VPN without Problems. 
• I reach the RUT over OpenVPN with his IP Adress (192.168.10.49). And i can Ping it....
• I reach the RUT over the Internet with his Public IP
• I reach the RUT with a dyndns Adress
• I can Not Access to the PLC's (...10.120 - ...10.150)
• I see in the Telonika Wiki that i need a static Route for that, but i can't find a Guid to that

-> So, my Question is: How can i connect to LAN Devices that are connected with the RUT over OpenVPN

Comments

Hello

Here's a picture for better understanding, and Thanks for every Help!

---

And Yes, I think is the same Problem like this: Link to Forum

Answer 1

Hello,

Try using port forwarding on RUT955 (OpenVPN side).

Comments

I have read it: OPENVPN HowTo and i have to enable IP Forwarding