Question

The serial port is in NTRIP mode.

If I send GGA NMEA messages to the serial port will these be forwarded to the NTRIP server?

I don't think that is clear in descriptions and previous answers.

Answer 1

Hello,

Correct. RUT955's RS232/RS485 "NTRIP mode" is meant to forward connected NTRIP device's NTRIP data to NTRIP server.

Currently RUT955 itself cannot use this NTRIP data to correct its own GPS position.

Comments

So I think the question was, if a NMEA message is sent to the RS232 port of the TRB142, will this be forwarded to the NTRIP server? This was not possible in the past I think. You only coud send the message out of the GUI once on a established connection to the server but not cyclic.