Question

I am trying to set-up a remote HTTPs connection on a RUT950. The situation is the following:

• The router is connected via mobile connection.
• I can see the WAN IP address of the router in the Overview page of its Web interface.
• I enabled the option "Enable remote HTTPS access" under System/Administration/Access Control.
• I created a rule in the firewall to enable a computer in the WAN to access port 443

When I try to access the WAN IP address through a web browser (Chrome), I receive a message that the website could not be reached (it took too long).

What am I missing? Thanks! 

Answer 1

Hello.

Sadly for doing that you will need to request to your Mobile Internet Provider a special service of Public IP Simcard. With Standard Mobile Simcars you can't access the device from outside because the operators block any external connection. Thankfuly you have multiple ways to overcome such limitations.

You can check if you have a private or a public IP in the overview page of the Router's Interface

https://wiki.teltonika.lt/view/RUT950_Overview

You can overcome any operator limitations by the following means.

1. Is by using our RMS platform, this will grant access to your devices and to the devices behind the router.

https://wiki.teltonika.lt/view/RMS

2. install the package "Zerorier" and enable a VPN inside your router to access it any time from anywhere

https://wiki.teltonika.lt/view/RUT950_Packages

https://wiki.teltonika.lt/view/ZeroTier_One_VPN_configuration

Regards