Hi,
I've been using an RUT955 with FW RUT9XX_R_00.05.00.5 in first place. With this FW, I had issues with wifi completeley being unaccessable when conneting to WIFI Station with channels 11 and 12. Setup is:
- Wifi Station with SSID xyz
- WIFI AP with SSID abc
- WAN settings: Wifi Station first, mobile as failover
As long as WIFI Station xyz is in reach everything is fine. If I'm moving my RV and loose connection to WIFI Station, WIFI goes into an undefined status and the router is no longer accessable via WIFI (I need to connect via LAN cable to the router in order to change configuration). There is no failover to mobile.
If WIFI Station is connected to channels 1 to 10 it works as expected.
Now I've upgraded to FW RUT9XX_R_00.05.02.2 and subsequent to RUT9XX_R_00.05.02.5. With both FW the situation is even worse, now WIFI goes into an undefined status on every disconnect to WIFI Station. If I then connect via LAN and change configuration (disable WIFI Station), WIFI comes up again an I can connect via WIFI.
But even I've got an internet connection via Mobile, on Overview Page in WAN section it shows "IP Adress N/A" (but there is an IP Adress).
With reference to the question "RUT955 dropping wifi output" it seems that there is a bug in the WIFI implementation.
Regards,
Rudi