7855 questions

9275 answers

14928 comments

12723 members

0 votes
910 views 3 comments
by

Hi, I've spend some hours now to get a VPN to my RUT955 working....no luck... I've setup a lot of devices and VPNs, although the RUT955 has lots of settings, I can't get is to work. I've tried this guide: https://community.teltonika-networks.com/4762/vpn-connection-on-android

Also the VPN setup examples: https://wiki.teltonika.lt/view/OpenVPN_configuration_examples#OpenVPN_configuration_type

Can anyone post a working setup for RUT955 VPN (PPTP or OpenVPN) from android device (with standard onboard PPTP android client) and from PC (standard Win10 PPTP client)?

Thanks a lot!

1 Answer

0 votes
by
Hello,

do you want to tunnel all traffic or just subnet?
by
Preferably subnet only, but all trafic will do also.

Thx
by

There should be nothing special.

To allow leave router:

I have tried win10 and win7 and android everything goes with default settings.

What exact problem do you have? Windows can't connect or can't use tunnel?

by
Simons,

I checked again, used same/standard setup as you describe. I reseted my RUT955 to default and did it al over agian...: no PPTP connection... :-((

I tested 2 different clients (win10 & android) which is working fine on an other router (other brand/type) and no problems in setting it all up... Also used Win10 as standard PPTP client, no connection to my RUT955.

Where can I get the best debug info on the RUT955 to see where the incomming PPTP connection is dropped? If I check the events log / network event on the RUT955 I don't see anything concerning the PPTP connection.

RUT955 is directly exposed with public IP, no further firewall or anything in between to the client.

 Please advice, thx!