Question has been asked but no response after initial contact.
Have set up a RUT950 (RUT9XX_R_00.06.06.01) with a new profile,
- set up and enabled a L2tp server instance with the 192.168.1.x series as documented
- set up and enabled a IPSEC instance with a preshared key
- disabled PPTP as that is not going to be used (its intended for an Apple/Linux site)
Have then rebooted RUT950
W10 configured as documented but get the NAT/VPN not allowed, but IP responds if PING'ed - but the office allows VPN connections. Have the Troubleshoot and the error message if anyone could help.