Hi.
We are using several RUT240 units running the most recent stable firmware.
We have between 8 and 20 devices connected to each unit, and the devices are all assigned their IP address from the RUT240 based on their MAC address.
However when the menu "Staus/Network/LAN" is entered the RUT240 says "Collecting data" and then shows a list of DHCP leases.
The issue is that it only shows about half of the devices. It shows for example 8 devices, eventhough I know that 18 devices are connected, and they all have been assigned IP's by DHCP since I can ping them. The DHCP lease time is 12 hours.
Why aren't all the DHCP leases shown in the list?
The devices are connected to the RUT240 LAN port through a 16 port normal switch. Not managed or anything special.
Thanks in advance
rco133