Hello,
Setup:
Brand new TRB145, two wires and HAGER ECR380D power meter
Newest firmware: TRB1_R_00.02.05.2_WEBUI.bin
P.s. Also tried on: TRB1450_R_00.02.03.2_LEGACY.bin (web gui didn't even allow to set multiple device ID's using "1-32" method)
1. Works:
Testing via CLI or SSH:
root@Teltonika-TRB145:~# modbus_tcp_test 192.168.2.1 502 5 1 3 4215 1 16bit_uint_hi_first 0
Output: [2018]
2. Doesn't work:
Testing:
root@Teltonika-TRB145:~# modbus_tcp_test 192.168.2.1 502 5 1 3 4215 1 16bit_uint_hi_first 0
connect: Connection refused
Only changes:
Slave ID configuration type = Obtained from TCP
Permitted slave IDs = 1-247 (tried different combinations like 1,2,3 1-2 etc...)
Am I missing something?!