Hi,
I am trying to configure RUTX as my core network device (for transportation system). I have the following network interfaces:
- LAN1 : Wired, Static, DHCP on, 192.168.7.0/24, VLAN 1
- LAN2, LAN3: Wired, Static, on, 192.168.6.0/24, VLAN 6
I also need 2 wifi SSID that I want on other subnets so I created 2 more vlans and 2 network interfaces with physical interface set to the wifi network and the Switch vlan.
So far this is working.
I need to have static DNS entries for a local domain so I activated Network > DNS and uploaded a hosts file.
DNS is working fine when I connect my computer with wifi or wired.
I need a hotspot as well. So I created a hotspot on a wifi network not binded to a network.
Clients on the hotspot will need to access a server in the LAN1 network.
But this is not working, I cannot ping the server in my LAN1 network when connected to the hotspot. I can ping addresses on internet though.
How can I do that as the hostpot network does not seem to be in a firewall zone ?
Is there a way to allow traffic from hotspot to a firewall zone or to another network ?
thank you,
Brice