7012 questions

8393 answers

13630 comments

10306 members

0 votes
33 views 0 comments
by

Hi,

I have made progress on the router links between the sites.
At this moment, from any router I can ping all the IP addresses, I have positive feedback.
The radio relays cannot communicate with each other.
When there is a walkie-talkie communication on the master relay, the slave 1 relay (site 2) and slave 2 relay (site 3) must receive the walkie-talkie communications from the master relay (site 1).

I have to commission all the equipment for the EDF group.

I'm probably stuck on configuring firewalls in routers or site-to-site routing.

I'm sure your engineers by connecting this into the routers can explain to me where it's wrong.

Monday morning TEAMVIEWER will be activated and all the equipment will be in service.

Thanks for your help.

Below are the ping lists are ok:

(I did not touch the rules of firewalls.)

From the ROUTEUR 1 (site 1) / 40.99.8.101 / VLAN46

Forwading 50011 port to the 40.46.8.11 IP

ping to 40.99.8.101 = ok

ping to 40.46.8.101 = ok

ping to 40.46.8.11 (repeater MASTER site 1) = ok

ping to 40.99.8.102 = ok

ping to 40.47.8.102 = ok

ping to 40.47.8.11 (repeater esclave 1 site 2) = ok

ping to 40.99.8.103 = ok

ping to 40.48.8.103 = ok

ping to 40.48.8.11 (repeater esclave 2 site 2) = ok

From the ROUTEUR 2 (site 2) / 40.99.8.102 / VLAN47

ping to 40.99.8.101 = ok

ping to 40.46.8.101 = ok

ping to 40.46.8.11 (repeater MASTER site 1) = ok

ping to 40.99.8.102 = ok

ping to 40.47.8.102 = ok

ping to 40.47.8.11 (repeater esclave 1 site 2) = ok

ping to 40.99.8.103 = ok

ping to 40.48.8.103 = ok

ping to 40.48.8.11 (repeater esclave 2 site 2) = ok

From the ROUTEUR 3 (site 3) / 40.99.8.103 / VLAN48

ping to 40.99.8.101 = ok

ping to 40.46.8.101 = ok

ping to 40.46.8.11 (repeater MASTER site 1) = ok

ping to 40.99.8.102 = ok

ping to 40.47.8.102 = ok

ping to 40.47.8.11 (repeater esclave 1 site 2) = ok

ping to 40.99.8.103 = ok

ping to 40.48.8.103 = ok

ping to 40.48.8.11 (repeater esclave 2 site 2) = ok

1 Answer

0 votes
by
Hello,

For the said scenario you are trying to implement. I would like to know how the RUTX08 routers able to communicate with each other are testing this one locally or you are using your office network? Is there a router before the RUTX08? It would be nice if you are able to share the WAN IP addresses the RUTX08 is getting and what is the IP address of the office main router.

Could you also share with me a copy of the troubleshoot file of the RUTX08 so that I can check your configuration?

Regards,
Mellow