Hi,
I have been having quite some difficulty setting up my first Teltonika router (RUT950)
Here are my setup steps:
1. Login to Admin at 192.168.1.1
2. Change Password
3. Admin => Network => LAN => update IP address to 192.168.10.1 to avoid conflict
4. Login at Admin at 192.168.10.1
5. Admin => Network => WAN => set Main WAN to WiFi
6. Admin => Network => WAN => WiFi => Scan => Join Network
Now I have a working access point I can connect to (RUT950_BB42), with the RUT950 sourcing it's internet connection through WIFI WAN. When I visit Admin => Network => WAN, I can see the IP Address for WiFi (WAN) is 192.168.1.29. NOTE: when joining the network in step 6, the progress indicator does not get passed "/etc/config/quagga" and I have to manually refresh the screen and log back in to the Admin panel.
7. turn the RUT950 off and on again, or reboot through Admin => System => Reboot
Now the access point RUT950_BB42 is not available.
8. Log back in to the Admin panel at 192.168.10.1.
Now when I visit Admin => Network => WAN, I can see the IP Address for WiFi (WAN) is “-“
I have tried repeating the set up steps 5 and 6 as detailed above and rebooting again. This does not resolve the issue.
The only thing that does resolve the issue is going to Admin => System => Administration => Restore to Factory defaults, then starting again at step 1 as detailed above. I can’t be doing that every time the router is turned rebooted.
I’ve spent a good 6 hours trying to work out what the issue is here with no luck. I’m really hoping there is a solution because the RUT950 does seem like a quality product and I would like to use it however my initial experience has been It’s very frustrating and costly.
Thanks,
Shea