Hello, I can't interrogate mqtt broker (127.0.0.1) RUTX11. How can this problem be solved?
Configuring MQTT broker
Tell me how to get bluetooth data through the local MQTT broker RUTX11 using the DATA TO SERVER function?
MQTT EXPLORER. /LinkIOBT?
Regarding the scenario you want to achieve first of all you need to connect/pair a BLE sensor to RUTX11 then once BLE data is successfully paired it should be displaying the data in the Web UI like this:
Then go back to the BLE to the Bluetooth page you need to enable the Store Data functionality of the BLE in order for you to use Data to Server functionality.
You can get more information at this link: RUTX11 Bluetooth - Teltonika Networks Wiki (teltonika-networks.com)
Now for the Data to Server config since you want to do it via MQTT you must follow the configuration below:
If you have some credentials enabled you can enable it here:
Then make sure everything is correct and configured well.
Note: BLE Sensor we are supporting as of now is all ELA sensors.
Let me know the results.
I hope it helps
Hello, I forgot to check the store data. The problem was solved, thanks!
Please send an example of JSON format to get battery data of ble sensor. Thank you!