FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
+1 vote
198 views 0 comments
by anonymous

Hi

Currently we control cameras with the RUT240 OC output firing a relay. However, in our case, as were powering both the camera and RUT240 via the same 12v power supply, in theory, i should be able to remove the relay between the RUT and the camera and allow the RUT to control the camera directly. As the camera is using less than 9w

I Have attached an image to help

1 Answer

+2 votes
by anonymous

Hello, 

Regarding the scenario you are trying to implement it would be best to connect it with a relay because if you connect it directly there is a chance that the devices will be damaged because the Digital OC Output could handle up to 300mA over that max current devices may be damaged. 


I hope it helps

Regards,
Mellow