WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Failover - Interfaces are missing

0 votes
277 views 13 comments
by anonymous

Hello Support Team,

I have deleted “MOB1S1A1“ and created a new instance with the same properties as “MOB1S1A1“. Only the name is different.

Under “NETWORK/INTERFACES“ the new interface is visible,

but under “FAILOVER“ I missing that new interface (also after a restart).

Do you have an idea?

Kind regards,

Jörg

1 Answer

0 votes
by anonymous

Hello,

I have tried to reproduce your issue but I was not able to. My identical new Mobile interface was shown in the Failover settings:

Which firmware version you were running (my test was on RUTX_R_00.07.00)? Could you try to factory reset your device and try again?

Regards.

by anonymous

Hello,

I'm using the same firmware version.

I have done a factory reset and when I create a new instance and press “Save and Apply“ after entering all setting I see the Loading  icon over serval minutes.

After reconnecting with the WEBUI I can see that the new instance is visible but without the done settings.

Kind regards,

Jörg

by anonymous

In that case, I would recommend reflashing your firmware via the bootloader menu: https://wiki.teltonika-networks.com/view/RUTXxx_Firmware_via_The_Bootloader_Menu

by anonymous

The update failed.

During the update I received an error message

by anonymous
Which device are you using?
by anonymous
I'm using a RUT950
by anonymous
Oh, alright, then the issue is clear. You have tried to upload RUTX firmware via the bootloader menu and that is why you are getting an error.
by anonymous
Which file do I have to upload?
by anonymous

Please download firmware from this page: https://wiki.teltonika-networks.com/view/RUT950_Firmware_Downloads

(RUT9_R_00.07.00)

by anonymous

Now I have received this message

by anonymous
Well, that is unexpected, then the only way is to upload the RUT9XX_R_00.06.08.3 version from the same page.
by anonymous

That is working

by anonymous
after the upload I have uploaded to the lastest FW.

Now the new created instance is visible under failover but the “Loading“ Icon was visible serval minutes. I have interrupted it.
by anonymous
WebUI loading spinner is a known issue for us and we are working to fix it with future firmware releases.

Regards.