I connect my RUT240 to internet via mobile LTE. There is no other connection and LAN balancing is disabled. I have the latest firmware installed RUT2XX_R_00.01.14.4 but the issue was present in older versions as well. I have a wifi activated on RUT240 and I also connect a DLink Wifi repeater via an ethernet cable (LAN port). I have an RMS configured and working well.
Whenever I reboot RUT240, the primary wifi as well as the secondary (wifi repeater connected via ethernet) do not work unless I disconnect the ethernet cable before the reboot. When I have have the cable connected (same problem in both LAN port or WAN port set as second LAN port) and the device reboots, it appears correctly online in the RMS, I can control it via RMS, but the device does not send the internet connection to the wifi, nor the ethernet cable. When I reboot the device with the ethernet cable disconnected, wifi starts connecting to internet correctly OK. If I then connect the ethernet cable, the wifi repeater also works well.
How can I fix this issue so that the wifi and ethernet connections works after reboot, e.g. after a power outage please?