FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
350 views 2 comments
by anonymous
I have just attempted to upgrade my RUTX09 to the latest firmware and it has failed to restart. After an hour or so I attempted a manual reboot followed by a manual reset neither or which have worked. The only light on the device is the flashing green power light. I am a MAC user and I am struggling to work out where I go from here to try and restore the device to a functional version of the firmware, please can someone help as I am reliant upon this device for WFH?

Many thanks

1 Answer

0 votes
by anonymous

Hello,

Please try reinstalling the software via Bootloader menu. You can find instructions on how to do that here:

https://wiki.teltonika-networks.com/view/RUTXxx_Firmware_via_The_Bootloader_Menu

Regards.

by anonymous
Thanks, I did see that but I have a Mac, it appears that there are no instructions for a Mac?

Any other thoughts?
by anonymous
I managed to apply the same guidance by manually setting my Ethernet connection on the MAC (System Preferences, Network, Ethernet) and then manually configuring as follows:

Configure iPv4 (select Manually from drop down)

IP address: I used 192.168.1.199

Subnet Mask 255.255.255.0

I was then able to open up the router menu in Chrome and update the firmware from a previously downloaded file.