Im having a bit of an issue with our new 950 routers. I cant seem to get port forwarding to work properly.
950 with a sim card. Running fw RUT9_R_00.07.01.2.
Network camera attached through LAN.
Network camera LAN ip is: 192.168.1.237
I want to port forward all http and https traffic to the camera through the router.
Ive added rules in port forwarding:
IPv4 tcp+udp from any host in wan via any router IP at port 80 -> IP 192.168.1.237, port 80 in lan
IPv4 tcp+udp from any host in wan via any router IP at port 443 -> IP 192.168.1.237, port 443 in lan
No other rules are enabled.
Ive tried to change WAN to mobile NAT in Network Interfaces but no avail...
I can connect to the camera through the LAN specified IP 192.168.1.237 and internet itself works, however I cannot connect through my public IP.
Im running the same setup with an older fw RUT9XX_R_00.03.256 where this setup works.
What am I missing?