FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
273 views 2 comments
by anonymous

Hello. I use a RUTX09 with two Bouygues Telecom SIM cards and everything works fine, but I have abnormally high Internet consumption when I do not download or play NETFLIX type video. I found the tools for global network and WLAN analysis fine, but I can't find how to analyze the 4G consumption for each device that accesses the Internet to determine which device or devices are consuming a lot. Thanks for your help.

1 Answer

0 votes
by anonymous

Hello,

Thanks for contacting TELTONIKA | Crowd-support forum.

Kindly be informed that vnstat is a console-based network traffic monitor for Linux and BSD that keeps a log of network traffic for the selected interface(s).

More information can be found here:

https://openwrt.org/docs/guide-user/services/network_monitoring/vnstat

Please note that vnstat a third-party opkg package.

On the other hand, our devices support many features that can help administrators for control their end devices such as Web Filter, Speed Limit, Mobile Data Limit.

Web Filter is always used when Administrators want to block access to specific websites.

More information can be found here:

https://wiki.teltonika-networks.com/view/RUTX09_Web_Filter

Speed Limit, you can limit the download and upload speeds for different interface on your device with the help of the Quality of service (QoS) feature.

More information can be found here:

https://wiki.teltonika-networks.com/view/Speed_Limit

Mobile Data Limit provides you the possibility to set data usage limits for your mobile network interfaces and data usage warnings via SMS message in order to protect yourself from unwanted data charges.

More information can be found here:

https://wiki.teltonika-networks.com/view/RUTX09_Interfaces#Mobile_Data_Limit

In addition, if you are using a device equipped with Wi-Fi such as RUT950, RUTX10, RUTX11, RUTX12, RUTXR1…, you can check status and session statistics of currently logged in users using HOTSPOT service.

More information can be found here:

https://wiki.teltonika-networks.com/view/RUTX11_Hotspot#User_Management

 

Best regards

by anonymous
VNSTAT must be installed on the RUTX09 or on a PC under linux? Thank you.
by anonymous

Hello,

Please note that vnstat can be either instaled on RUTX09 or PC-linux.

Here's an example for RUTX device:

Before using opkg you should first update the list of available packages by executing this command:

opkg update

To install a package, use this syntax:

opkg install vnstat

show transfer rate in real time for eth0

root@Teltonika-RUTX:~# vnstat -l -i eth0

Monitoring eth0...    (press CTRL-C to stop)

   rx:       41 kbit/s    15 p/s          tx:       31 kbit/s    15 p/s^C

 eth0  /  traffic statistics

                          rx         |       tx

--------------------------------------+------------------

  bytes                     1.11 MiB  |       60.08 MiB

--------------------------------------+------------------

          max             182 kbit/s  |     9.96 Mbit/s

      average           81.89 kbit/s  |     4.42 Mbit/s

          min               2 kbit/s  |        2 kbit/s

--------------------------------------+------------------

  packets                      16139  |           44444

--------------------------------------+------------------

          max                328 p/s  |         869 p/s

      average                141 p/s  |         389 p/s

          min                  3 p/s  |           3 p/s

--------------------------------------+------------------

  time                  1.90 minutes

 Best regards,