subscribe to our Youtube
You can use Data to Server feature available in RUT955, you can select HTTPS protocol which will be used to send the data.
I also have a more detail manual, but this is not specifically for SQL but it will send a POST request to a server.
i am using rs485.
in my first question you will find a drawing with setup.
i use a eastron sdm230-modbus meter with RUT955 and tried now with a TRB145.
modbus baudrate 9600, parity even, ID=1
picture 2 modbus connector
RED wire = A+ and BLACK wire = B-
i have installed the latest FW.
hopefully you can help me
if you need more information please let me know
If you're using rs485 you need to install Modbus serial master from package manager.
You can refer to this link https://wiki.teltonika-networks.com/view/RUT955_Modbus#Modbus_Serial_Master
Most sensors are using 2 wire diagram, so please confirm this to sensor's manufacturer.
If it is using 2 wire diagram you need to create a jumper between Rn to Dn and Rp to Dp