Question

Is there any way of setting a VLAN directly on the LAN port of my TRB140?

Or, should I be doing it at the L2 switch's port?

Answer 1

Greetings,

Thank you for the question.

In order to setup VLAN on your TRB140, follow these steps:

1.     Login to WebUI and navigate to Network -> VLAN.
2.     Create 2 new instances:
   •         Device name: LANeth, TAG: 1, Interface: eth0
   •         Device name: LANusb, TAG: 2, Interface: rndis0
3.     Navigate to Network -> Interfaces and create new instance:
   •         Name: VLAN, Protocol: Static, set an IP of a different subnet (for example 192.168.10.1)
   •         Enable DHCP server
   •         Click on PHYSICAL SETTINGS and enable Bridge interfaces, set interface eth0, LANeth
   •         Save & Apply
4.     Next edit LAN interface, PHYSICAL SETTINGS, make sure Bridge is enabled and Interface is set to rndis0, LANusb
5.     Save & Apply

Best regards.