WIKIABOUT

FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

Most popular tags

rut955 rut240 rut950 rutx11 rms vpn to openvpn wifi not sms trb140 firmware connection - ipsec on rutx12 rutx09 modbus
We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.

Webgui not working if i compile SDK with coova-chilli

0 votes
330 views 4 comments
by anonymous
I am trying to compile firmware 7.2.4 using the SDK. https://wiki.teltonika-networks.com/gpl/RUT9_R_GPL_00.07.02.4.tar.gz

The stock sdk compiles fine, installs, and I can work in the web ui.

But if I turn on coova ("make menuconfig") in the network>captive portal >coova-chilli, I cannot even login with the web GUI. I can login with SSH to flash the stock image again.

If I use the stock image and use the webgui package manager to install hotspot 1.0, it fails to install.

If i download the hotspot package zip file from your downloads page, and upload it to the stock image, it passes verification and starts the install but then locks up the GUI. A refresh is needed to continue working. It appears in the webgui package list. No idea if it is working correctly.

If i SSH into the stock image, run opkg update; opkg install coova-chilli; it fails with: Checksum or size mismatch for package vuci-app-coovachilli.

How do I get coova to compile and work using the SDK?

1 Answer

0 votes
by anonymous

Hello,

Could you try to replace M to * in a highlighted Enable Wi-Fi Hotspot support option in a picture below

And recompile the firmware?

Best regards,

by anonymous
fails with ERROR: package/network/services/net-snmp failed to build.
by anonymous
looks like a fresh 18.04 os install in a vm solves this. it compiles. but i havent tested it yet. Will post update if it fails
by anonymous

Still not working. It hangs the webGUI. Are the console errors in the browser a clue to whats wrong?

by anonymous
Ok i managed to get it working. I have to compile the stock version as is on 1 core. then once its done, i can go into menuconfig and add coova and mqtt.