Morning,
Will try to explain as much as possible what i would like to achieve, which unfortunately is not working at this moment.
Using Firmware version RUT2_R_00.07.02.2.
From network security we need to establish a connection via PEAP protocol, which means username and password.
We would like to achieve the following:
- Setup the Teltonika RUT240 as a router, which will be connected via ethernet cable on a medical device. This ethernet connection is needed because this medical device is not able to setup WiFi connection.
- Setup the Teltonika RUT240 to be able to connect towards out Corporate WiFI network with the PEAP protocol.
At this moment I have setup the Teltonika RUT240 device with assigned IP addres 10.0.0.1 in the General Settings. The medical device will be assigned to IP address 10.0.0.2, which i already did in the LAN configuration section.
Medical device IP Address is 10.0.0.2 with Gateway 10.0.0.1.
The problem is for some reason I cannot create Wireless connection towards our Corporate network. If I go to Network - Wireless I am able to use the Scan option and detect our Corporate Network and see that the Encryption is WPA2 802.1X (CCMP). I click the Join Network option and enter the password I received from our Network team. IN the field name of the network I add the exact name of our Corporate network and click on Submit. The item shows in the list and i can see the status Running. But how can i confirm that indeed this device is connected to our Corporate Network (without asking our Network team obviousbly)? I want to visualize and check for myself that indeed this setup is correct and working.
Adding note, i checked the Scan tool to see if i could find my iPhone hotspot and it has no problems to find the hotspot.