subscribe to our Youtube


14455 questions

17168 answers


0 members

We are migrating to our new platform at Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
233 views 2 comments
by anonymous
I want to use RUT950 as in following network connection.

      END1 ---- RUT950 ---- LTE (4G network) ---- RUT950 ---- END2

Is this connection method possible ?

In above connection, can IPsec or PPTP method be applicable ?

2 Answers

0 votes
by anonymous


Thank you for contacting Teltonika Crowd Support.

In order to achieve the above connection using IPSec or PPTP, you would need a public IP address on one of the routers.

Kindly refer to the link below for IPSec and PPTP configuration examples:

If at least one public IP address will be available on one of the routers, L2TP over IPSec would be recommended instead of stand alone IPSec or PPTP as L2TP over IPSec will allow to have secure tunnel. The following link provides an L2TP over IPSec configuration example:

If you do not have a public IP address on either of the two RUT950 routers, you could use ZeroTier One VPN, which is a 3rd party platform and you will be connecting to their server. Below are link for configuration example for ZeroTier One VPN:

Another option, which will not require a public IP address will be using RMS VPN. Further details about RMS VPN could be found by following the link below:

Warm regards


by anonymous
I will try your suggestion.

0 votes
by anonymous
I bought two RUT950 and had tried network connection as followed IPsec example and pptp example in wiki.

but I failed to connect between two RUT950 device.

If above network connection could be possible, can i have network configure file ?

I will tried to apply your RMS suggestion.

thank you.
by anonymous


Thank you for the feedback.

We recommend that you replicate the issue so that you may download and attached the troubleshoot file. Kindly ensure that at least one of the RUT950 routers has a public IP address when implementing IPSec or PPTP. To get information about the differences between private and public IP addresses, kindly follow the links below: 

To get the troubleshoot file, access router's WebUI and navigate to System -> Administration > Troubleshoot section and download troubleshoot file from there.

Warm regards,