FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
189 views 3 comments
by anonymous
Hi there!

We noticed that when configuring (a WPA2-locked) wifi in the new RUT241, it causes the creation of an open RUT241 ssid as well!

Why is that? This is really dangerous for the data consumption!

T
by anonymous
(in the photo you can see the AP stopped, but the default state is up and running!)

1 Answer

0 votes
by anonymous
Hello,

Could you tell, which firmware version does this happen on?

Also, could you provide exact steps to reproduce the issue?

Best regards,
by anonymous
Hi, and thank you for the fast reply,

The firmware version is RUT2M_R_00.07.02.3.

Can not really recall the exact steps, but it was pretty straight forward:

 - changing the password of the wifi, and enabling the interface

It may be of use that we used an already-configured office wifi network to connect to the unit and set it up.

Cheers,

T
by anonymous

I was unable to replicate this. Could you update to RUT2M_R_00.07.02.6 and see if the same thing happens? If an unprotected access point is created, I would like you to generate and attach a troubleshoot file to your question. To generate the file, access router's WebUI, go to System -> Administration > Troubleshoot section and download troubleshoot file from there.

Files are private and visible only to Teltonika Moderators.