Hello,
I set the basic parameters of the mobile network on the RUT950 router (APN in a closed network), enabled port forwarding (7110-7113) on which the telemetry modules send data to the IP address of the server, and data collection from the module works correctly. I turned off WiFi.
However, the problem is that other traffic (eg communication and configuration of the module, pinging the module...) does not take place successfully (ping reports that the network is unavailable). This occurs when pinging from the server itself (where static routes are set to the mobile network via the LAN address from the router) and when pinging from the RUT950. I tried to set the routing on the RUT950 itself, set up the firewall,... but I did not establish communication between the LAN and the mobile interface. How to configure completely open traffic between mobile network and LAN?