FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
269 views 0 comments
by anonymous
Hi, we are currently testing the NTRIP package on the RUT956 with FW RUT9M_R_00.07.03.2.

We are wondering if there is a way to output RTK data in CLI when NTRIP is enabled and connected? And also if it is possible to output the rs232 port so that when we have "Serial device" set for NMEA Source we can see the NMEA messages from the serial device?

Thanks in advance!

Regards,

1 Answer

+1 vote
by anonymous

Hello,

  

Currently, the only output from the NTRIP client can be seen by running the command /usr/sbin/ntrip_client -d /dev/rs232 or /usr/sbin/ntrip_client -d /dev/rs485. It looks like this:

As for outputting the data from the serial device, that will most likely not be possible. I do not have the necessary equipment to test it, so can't tell for sure, but if the commands mentioned above do not show anything useful then it is unlikely to be possible.

  

Best regards,
DaumantasG

Best answer