subscribe to our Youtube
I am absolutely new to Teltonika and have a Problem with Site to Site IPSEC VPN to a Sophos XGS (not UTM).
The RUTX with Firmware RUTX_R_00.07.03.3 and Sophos XGS with SFOS 19.5.0 GA-Build197.
The IPSEC tunnel only does work for one Network. But behind the Sophos XGS are multiple Networks.
The following Screenshots do first show the working Configuration for one Network on both sides.
If you just have one network on both sides, that might be a solution for you.
My problem starts when i try to configure multiple Networks on the Sophos XGS Side.
When the failing Configuration is used, only one network will be reachable from the RUTX50/Teltonika Network.
The goal to have all central Networks be reachable from the Teltonika Site.
The following Screenshots are added to one PNG file. The forum only allows a few uploads, so i added all Screenshots to one file.
I hope you can see all.
Could you enable Compatibility mode in VPN -> IPsec -> Connection settings -> Advanced settings and check if connection to all subnets is established.
If issue persists, please provide troubleshoot file from System -> Administration -> Troubleshoot so I could look into it.