Question

Hi,

I'm satisfied with my RUTX14 and took it to my workation with great success,however I have issue with current location. Because it is in the middle of nowhere sometimes I have like 1 or 2 seconds electricity outage, which causes restart of the cable modem from TV company and my RUTX. After like 2 min WIFI with internet on modem is established, however my RUTX can't source WAN from it anymore. How I can enforce RUTX14 to come back to look on this source?

My current workaround:once I see that  modem can deliver internet  (just SSID shows up in WIFI available network)I must to restart my RUTX14  and then internet come back to Teltonika

Regards,

Lveuce

Answer 1

Hello,

You could try to configure automatic modem reboot, instead of having to resort to complete device restart.

To configure this, login to router's WebUI, navigate to Services -> Auto reboot -> Ping/Wget reboot page. There, edit existing or add a new instance. In its settings, enable the instance, set Action if no echo is received as Modem reboot, if necessary, adjust timing settings and host to ping or leave these values default. 

See if that helps.

Best regards,

Comments

It is working perfectly!

Thank you very much.

Best,

Lveuce