FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
532 views 3 comments
by anonymous

Hi,

Just got a new RUTX50 (Firmware: RUTX_R_00.07.04)

Data is working (4G LTE), but when trying to send a SMS using WebUI, I got a "Failed to send message".

So , i turned to CLI  :  gsmctl --debug --sms --send "+33xxxxx TEST1"

And got:

[gsmctl_send_sms:20] error: ERROR: Failed to parse response

Don't what is happening , thank you for any hints.

Regards.

PM.

3 Answers

0 votes
by anonymous

Hi,

Could you try downgrading your firmware? Please use RUTX_R_00.07.03.4. To download, click HERE. And make sure to uncheck "Keep Settings". Kindly let me know the result.

Hope this helps.

Regards,

Janmiguel

0 votes
by anonymous

Hello,

I would like you to attach a troubleshoot file to your question. Please, replicate the issue by sending a few SMS messages, then access router's WebUI, go to System -> Administration -> Troubleshoot section and download troubleshoot file from there. 

The logs in the file might provide more insight into the issue.

Attached files are private and visible only to Teltonika Moderators.

Best regards,

by anonymous
Hi,

As requested, here the troubleshoot file after I just tried to send 2 SMS with CLI this morning.

I stayed at the current version at the moment.

Thank you for your help.

PS: Am i wrong or there is no way to attach file in this forum ??
by anonymous
I see no file attached. Could you send it in a private message?

Best regards,
0 votes
by anonymous

Just downgraded firmware from RUTX_R_00.07.04 to R_00.07.03.4.

Same issue:

# gsmctl --debug --sms --send "+336xxxxx TEST1"
[gsmctl_send_sms:20] error: ERROR: Failed to parse response

Any hints ?.

PM.

by anonymous
Hi,

Issue when sending SMS is still ongoing... with same error (with GUI or CLI).

For info, receiving SMS is ok.

Can you have a look and give some news ?.

Thank you.

PM.