Hello all,
I am using RUT950 in motor home to access a digital IP-webbased HMI remotely. The HMI is already accessable locally by 192.168.1.105.
I created a Remote Access in Teltonika's "RMS Connect" by given the local IP and Port 80 for HTTP. The status shows me, that the device is reachable. I created a connection and the given URL start communication.
Here, it is half-working, because I see the black background loading and the wait-symbol is loading, but the rest of visualization is not loading. From supplier I got the info, that the websocket needs additional Port 3000.
I tried to open that port, but it still not work. I am not so experienced in IP port forwarding. Maybe it is just a beginners fault. ^^ Is somebody sees the issue?
Here are the settings:
| Name |
Protocol |
Source |
Via |
Destination |
Enable |
Sort |
|
|
Port 3000 |
TCP, UDP |
From any host in wan |
To any router IP at port 3000 |
Forward to IP 192.168.1.105, port 3000 in wan |
|
|
|
Is there a difference by using LAN or WLAN? I use WLAN to connect RUT950 to Internet and I use WLAN as hotspot for my digital IP-webbased HMI to connect to RUT950.
The websocket also gives me an error prompt:
Unhandled promise rejection: ,
{
"stack":"Error: Failed to construct 'WebSocket': An insecure WebSocket connection may not be initiated from a page loaded over HTTPS.\n
at Y._createNewWebSocket (https://b86c1160a8cdfc1dd64db321eaedef49.proxy1-connect.rms.teltonika-networks.com/index.d7eb21ffca1262030a1c.js:1:44111)\n
at Y.connect (https://b86c1160a8cdfc1dd64db321eaedef49.proxy1-connect.rms.teltonika-networks.com/index.d7eb21ffca1262030a1c.js:1:43079)\n
at Object.<anonymous> (https://b86c1160a8cdfc1dd64db321eaedef49.proxy1-connect.rms.teltonika-networks.com/index.d7eb21ffca1262030a1c.js:1:92982)\n
at Generator.next (<anonymous>)\n
at o (https://b86c1160a8cdfc1dd64db321eaedef49.proxy1-connect.rms.teltonika-networks.com/index.d7eb21ffca1262030a1c.js:1:10433)"
}
Thanks for any hint.
FW version: RUT9XX_R_00.06.08.3
