FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
137 views 1 comments
by anonymous
Hello community,

I try to configure a RUTX10 and need your help.

My setup:

WAN Port is used for a 5G Fritz!Box Router

LAN3 is changed to WAN2, as described here: https://wiki.teltonika-networks.com/view/Setting_up_RUTX10_LAN_as_WAN

If I try to connect to the wired (WAN2) D-Link AP (DAP-1665) I am redirected to the Teltonika login page.

Any ideas?

Router-Firmware: RUTX_R_00.07.02.1

Thanks a lot,

Heiko

1 Answer

0 votes
by anonymous

Hello,

  

It sounds like you might have an IP address conflict. Make sure the upstream routers are in a different subnet from the RUTX10 (e.g. is RUTX10 is in 192.168.1.0/24, then the TP-Link device could be in the 192.168.10.0/24 subnet).

If that does not help, I will ask you to update to the latest firmware which can be downloaded here, then in the WebUI, navigate to System → Administration → Troubleshoot and download the troubleshoot file. This file can be attached to the original post and will only be visible to Teltonika moderators.

  

Best regards,
DaumantasG

Best answer
by anonymous
Hello,

many thanks for the help! I updatedthe firmware of my RUTX10 and that's it. Everything works fine.

Best regards,

Heiko