Hello,
I'm trying to configure my RUTX11 router to send its Bluetooth data via the "Data to Server" feature. The router is connected to the company network via the WAN port. I have a my Win10 laptop connected in the router's LAN1 port. The laptop's IP address is 192.168.1.190. On my laptop I have a very simple python HTTP server program running on port 17000 that, for now, simply shows all requests made to it.
However I don't receive any requests at all on my laptop's end. I have disabled Win10 firewall on my laptop. Do I need to change some networking settings on the RUTX11 to make the data transmissions work? Can "Data to Server" send its BT data only into servers connected into the LAN[1, 2, 3] ports? Is it possible to use "Data to Server" to send the BT data into another device on the network via the WAN port?
I have attached my current RUTX11 Advanced sender settings as an image.
I'd appreciate any advice/hints on this matter, thank you.
Best regards, Arttu R
System
Firmware version: RUTX_R_00.07.00
Kernel version: 4.14.221
Device
Device name: RUTX11
Product code: RUTX1100XXXX