FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
1,218 views 6 comments
by
Hi, in my RUT995 i have 2 wan connections wired and mobile.

My wired connection can reach only an internet network(93.x.x.x/28) and the mobile can reach anything (including 93.x.x.x/28)

I would like to route the 93.x.x.x/28 network to wired if the link is up (failover mobile) and all other traffic to mobile connection.

I mean:

93.x.x.x/28 through wired if available or backup on mobile

0.0.0.0/0 always through mobile

Is it possible to make such configuration?

Thank you

1 Answer

0 votes
by anonymous
Hi,

Seems like load balancing could solve your issue.

Set ratio for mobile and wired to "1".

Then create rules that:

93.x.x.x/28 goes via wired wan

93.x.x.x/28 goes via wired mobile

 0.0.0.0/ goes via mobile.

(priority from top to down)
by
Thank you for your reply.

I have one question: in order to make load balancing works, do i have to select load balancing in the wan page or it works even if i have backup wan selected?
by anonymous
Yes, select it in WAN configuration tab.
by

I cannot make this works.

My wan configuration is:

My load balancing:

If I try to make the wired connection to fail, based on the nextconfiguration, i can still reach the server via the wired connection...

What am I missing?

Thanks

by anonymous
Hi,

For Wired WAN please use DHCP mode (not static).
by
Hi,

I can't use DHCP because there is no DHCP server in that WAN...

Thank you
by anonymous
Unfortunately then we do not have what to offer for such case.