Apparently my new RUT240 does not perform as expected after careful positioning.
4G/LTE Signal Strength: -51 dBm
RSRP -76 dBm
RSRQ -9 dB
SINR 4.7 dB
Speedtest by Ookla: Downstram 26/24 Mbps | Upstream 17/7 Mbps | Ping 40/47 ms via WLAN (2,4Ghz) WPA2
Speedtest by Ookla: Downstram 39/24 Mbps | Upstream 19 Mbps | Ping 40/47 ms via LAN
Is that fine?
Does the new firmware improve the radio performance?
Is there something I can do to get better throughput, while maintaining signal stability, without an external antenna?
A mainstream consumer product of the same price level in the same scenario performs as follows:
4G/LTE Signal Strength: 50%
RSRP -78 dBm
RSRQ -12 dB
SINR 4.4 dB
Speedtest by Ookla: Downstram 52 Mbps | Upstream 21 Mbps | Ping 40 ms via WLAN (5 Ghz) WPA2
Thank you.