Question

Hi,

I get the following error when I try to send an SMS with a RUT955:

SMS limit was reached, or would be passed by sending multipart message. Cannot send message

Receiving works OK and sending SMS with the same SIM card from a different device works OK.

Firmware version: RUT9XX_R_00.06.04.3

Thanks, 

Comments

Hi,

also having problem here. Originally with FW 00.06.05.1, now upgraded to latest with no effect: RUT9XX_R_00.06.05.3

Serial number 1105338806

Modem model EC25, FW version: EC25EUGAR06A03M4G

Will not send SMS via HTTP POST/GET, webUI SMS utilities or CLI gsmctl command, the error given is SMS limit.

SMS limit is not enabled (tried to enable and then disable it in settings, to no avail).

Sending SMS with the same SIM card inserted in a phone is possible so it is not SIM card or subscription problem.

gsmctl command reveals this internal error:

[email protected]:~# gsmctl --sms --send "<my_phonenumber> test"

lua: database disk image is malformed

stack traceback:

        [C]: in function 'nrows'

        /sbin/sms_counter.lua:35: in function 'check_table'

        /sbin/sms_counter.lua:225: in function 'start'

        /sbin/sms_counter.lua:247: in main chunk

        [C]: ?

LIMIT

---

Additional information: The problem persists even after downgrading to 06.04.5.

Not keeping settings when upgrading also didn't matter.

It seems I can't send SMS with this device at all...

Answer 1

Hello,

Please double-check your SMS limit configuration. Navigate to your router  WebUI Network -> Mobile -> SMS Limit and disable or clear SMS limit.

Comments

Hi,

OK, I tried that and still no change. Any ideas?

/B

---

This is also happening on our units, it appears to happen to about 1 in 10 messages, the next will send fine. We also do not have any SMS sending limit set on our units.

Firmware

RUT9XX_R_00.06.04.5