Hi,
I am using an RUT955. I would like to set the relay output using the digital input via HTTP GET/POST
I can sent the command http://192.168.0.1/cgi-bin/output?username=control&password=12345678&action=on&pin=relay
from a web browser after activating the POST/GET configuration in the output section and setting the username and password
I have enabled the input configuration, set Input Type = Digital , Trigger = Input shorted, Action = HTTP POST/GET, Type = POST
There are three other fields Header, Site Link and Post Data.
Could you tell me how to configure these fields to send the above command please
I have tried a number of things without getting it working
I have a switch contact on the digital input which is working according to the status page
Thank You
Regards