Question

Hello,

I am using a RUT240, I have already set the second wired eth port acting as LAN with static addressing (the LAN is configured with main address 10.0.10.71, subnet 255.255.255.0). I would like to configure the WAN Wifi adapter as a station to connect to an existing network on the same subnet 10.0.10.xxx and finally bridge the Wifi interface to the LAN.

Is it something possibile with RUT240? How can I do it?

The scope is being able to ping any device connected to the external router connecting from RUT240 wired ports (for example: ping eth3 from eth1)

Answer 1

Hello,

Could you try reading this ?

https://wiki.teltonika-networks.com/view/Relayd

Thanks.

I hope it helps.

Regards,

Ahmed

Comments

Hello, thanks for your quick reply.

I tried activating the Relayd option and it was working for a while.  Then I reboot the RUT240 and now it seems back to the previous situation even if the Relayd option is still activated.

Any suggestion?

Thanks

Matteo

---

Hello,

May i know what is the firmware on device ?

Have you tried upgrading to the latest ?

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads

Thanks.

---

Hello thanks for your help.

I am using FW 1.12.3.

I will try to update the FW and I will let you know if this solves the issue

Thanks again

Matteo

---

I updated the FW version.

Using FW 1.13.3 everything is working fine. Thank you!

So is there a known issue using Relayd with FW 1.12.3?

Matteo

---

Hello,

Thanks for updating.

Happy to hear that issue has been resolved.

In each new firmware release there are fixes to the issues.

You can check fixes here:

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads

---

Thank you!

Matteo