FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
355 views 6 comments
by anonymous

Hello,

I am using a RUT240, I have already set the second wired eth port acting as LAN with static addressing (the LAN is configured with main address 10.0.10.71, subnet 255.255.255.0). I would like to configure the WAN Wifi adapter as a station to connect to an existing network on the same subnet 10.0.10.xxx and finally bridge the Wifi interface to the LAN.

Is it something possibile with RUT240? How can I do it?

The scope is being able to ping any device connected to the external router connecting from RUT240 wired ports (for example: ping eth3 from eth1)

1 Answer

+1 vote
by anonymous
Hello,

Could you try reading this ?

https://wiki.teltonika-networks.com/view/Relayd

Thanks.

I hope it helps.

Regards,

Ahmed
Best answer
by anonymous
Hello, thanks for your quick reply.

I tried activating the Relayd option and it was working for a while.  Then I reboot the RUT240 and now it seems back to the previous situation even if the Relayd option is still activated.

Any suggestion?

Thanks

Matteo
by anonymous
Hello,

May i know what is the firmware on device ?

Have you tried upgrading to the latest ?

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads

Thanks.
by anonymous
Hello thanks for your help.

I am using FW 1.12.3.

I will try to update the FW and I will let you know if this solves the issue

Thanks again

Matteo
by anonymous
I updated the FW version.

Using FW 1.13.3 everything is working fine. Thank you!

So is there a known issue using Relayd with FW 1.12.3?

Matteo
by anonymous
Hello,

Thanks for updating.

Happy to hear that issue has been resolved.

In each new firmware release there are fixes to the issues.

You can check fixes here:

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads
by anonymous
Thank you!

Matteo