7572 questions

9026 answers

14571 comments

11783 members

0 votes
76 views 6 comments
by

Hello,

I am using a RUT240, I have already set the second wired eth port acting as LAN with static addressing (the LAN is configured with main address 10.0.10.71, subnet 255.255.255.0). I would like to configure the WAN Wifi adapter as a station to connect to an existing network on the same subnet 10.0.10.xxx and finally bridge the Wifi interface to the LAN.

Is it something possibile with RUT240? How can I do it?

The scope is being able to ping any device connected to the external router connecting from RUT240 wired ports (for example: ping eth3 from eth1)

1 Answer

+1 vote
by
Hello,

Could you try reading this ?

https://wiki.teltonika-networks.com/view/Relayd

Thanks.

I hope it helps.

Regards,

Ahmed
Best answer
by
Hello, thanks for your quick reply.

I tried activating the Relayd option and it was working for a while.  Then I reboot the RUT240 and now it seems back to the previous situation even if the Relayd option is still activated.

Any suggestion?

Thanks

Matteo
by
Hello,

May i know what is the firmware on device ?

Have you tried upgrading to the latest ?

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads

Thanks.
by
Hello thanks for your help.

I am using FW 1.12.3.

I will try to update the FW and I will let you know if this solves the issue

Thanks again

Matteo
by
I updated the FW version.

Using FW 1.13.3 everything is working fine. Thank you!

So is there a known issue using Relayd with FW 1.12.3?

Matteo
by
Hello,

Thanks for updating.

Happy to hear that issue has been resolved.

In each new firmware release there are fixes to the issues.

You can check fixes here:

https://wiki.teltonika-networks.com/view/RUT240_Firmware_Downloads
by
Thank you!

Matteo