Firmware build date: 2022-06-03 11:26:05
I am new to network technique but I hope I got it right till now.
I want to create a Lan-Guest-IoT segmentation. Let's only talk about Lan-Iot. Lan has 192.168.1.0/24 and IoT has 192.168.2.0/24.
I realized that my router has to have (at least) two interfaces, one for LAN and one for IoT. I assigned the net ips and subnet masks. Both interfaces are running.
Now, I have two wireless adapters. One is called X the other X IoT. I could assign the network to each Wireless adapter, so I suppose that X is assigned to 192.168.1.0/24 and X IoT is assigned to 192.168.2.0/24.
My first question is following. Is it correct to create a VLAN with (at least) two untagged ports, put the 192.168.1.0/24 to the first vlan port and the 192.168.2.0/24 to the second vlan port? Is this a physical segmentation? Would it be possible to have the both nets 192.168.1.0/24 and 192.168.2.0/24 on the same physical net? (I have heard that his is called overlay network).
My second question is regarding a "bridge". A bridge is a layer link device connecting two devices on OSI level 2 together. Before I started to create my segmentation, I can rememeber that there was an interface called br-lan available. As far as I understood, it combined the lan and the wlan to one "ethernet-wlan" lan. Is this correct? How can I now create a
- "ethernet-wlan" lan
- "iot ethernet- iot wlan" lan
In my physical settings of my two interfaces. I have currently dfined
If I change it to
I cannot connet to the router anymore and have to reset t factory settings. Shouldn't there be something like
Thanks a lot for help.