FOR TIPS, gUIDES & TUTORIALS

subscribe to our Youtube

GO TO YOUTUBE

14455 questions

17168 answers

28195 comments

0 members

We are migrating to our new platform at https://community.teltonika.lt. Moving forward, you can continue discussions on this new platform. This current platform will be temporarily maintained for reference purposes.
0 votes
579 views 23 comments
by anonymous
When wired LAN connection from the PC everythig works fine. But when i activate openVPN in trb140 software, it stops conneting to lan devices connected to the router. Via openVPN tunnel i can only ping or acces the router, not the lan connected divice.

2 Answers

0 votes
by anonymous
Hello,

Is your TRB device configured as a server or a client?

Could you provide a topology of your network and details of your configuration?

Best regards,
by anonymous
nothing helped. new troubleshoot file added for you to see
by anonymous
now i don't see device in ARPsection status Routes, ip and mac adress was shown before, now nothing.
by anonymous

Since your server's LAN is now 192.168.2.1, push option should be route 192.168.2.0 255.255.255.0.

by anonymous
done, still no acces to lan via OpenVPN
by anonymous
i can't eaven ping the router from lan connected m251 controller software, when openVPN is on, when its off the ping returns.
0 votes
by anonymous
tried setting everything once again, still not working
by anonymous
Please delete client configuration instance on TRB device.

Could you also show .ovpn client configuration file from your PC?
by anonymous

client config delated. this is my client.ovpn file

by anonymous
is it ok? or maybe there is my problem?
by anonymous
Please help. Still no clue. i need this working
by anonymous

Got it. Everything works fine now. Problem was port forwording. I did it "upside down" this is why it dident worked.

It should be forworded from openvpn to Lan. My setting was from Lan to OpenVpn.