Question

When wired LAN connection from the PC everythig works fine. But when i activate openVPN in trb140 software, it stops conneting to lan devices connected to the router. Via openVPN tunnel i can only ping or acces the router, not the lan connected divice.

Answer 1

Hello,

Is your TRB device configured as a server or a client?

Could you provide a topology of your network and details of your configuration?

Best regards,

Comments

nothing helped. new troubleshoot file added for you to see

---

now i don't see device in ARPsection status Routes, ip and mac adress was shown before, now nothing.

---

Since your server's LAN is now 192.168.2.1, push option should be route 192.168.2.0 255.255.255.0.

---

done, still no acces to lan via OpenVPN

---

i can't eaven ping the router from lan connected m251 controller software, when openVPN is on, when its off the ping returns.

Answer 2

tried setting everything once again, still not working

Comments

Please delete client configuration instance on TRB device.

Could you also show .ovpn client configuration file from your PC?

---

client config delated. this is my client.ovpn file

---

is it ok? or maybe there is my problem?

---

Please help. Still no clue. i need this working

---

Got it. Everything works fine now. Problem was port forwording. I did it "upside down" this is why it dident worked.

It should be forworded from openvpn to Lan. My setting was from Lan to OpenVpn.